W/UP 140W FOIL HTR 1 M2 WLFH-140W/140

An electric underfloor heating foil mat designed for floating floor finishes, delivering even, gentle heat with a low-profile build. This 1.0 m² Warmup foil heater provides 140 W/m² output (140 W total), ideal for use beneath laminate and engineered wood in dry interior rooms. The foil layer spreads heat uniformly across the floor surface and installs quickly without significantly raising floor height.

Intended for dry installations under floating floors, it should be laid over a suitable insulation underlay and controlled by a floor-sensing thermostat for safe, efficient operation. The heating element is factory-encapsulated within the foil and connects via a single cold lead for straightforward wiring. For safety and compliance, the system must be RCD protected and installed by a qualified electrician. Select mat sizes to match the free floor area; the heating element must not be cut.

• Brand: Warmup PLC
• Type: Electric foil underfloor heating mat
• Model/Code: WLFH-140W/140 (1.0 m²)
• Coverage: 1.0 m²
• Heat output: 140 W/m² (140 W total)
• Voltage: 220–240 V AC
• Profile: Low-profile, foil-encapsulated element for even heat distribution
• Installation area: Dry rooms under floating floors (laminate, engineered wood, select click LVT)
• Not for: Wet areas or direct installation under tiles or glued-down floors
• Control: Requires a floor-sensing thermostat (sold separately)
• Electrical: Single cold-tail connection; RCD protection required
• Installation: By a qualified electrician; do not cut the heating element